[Woodfloor] Full Spread Glue For Our Rift And Quartered White Oak Flooring At Our Navyyardreno We First Glue Down A 1 4” Rubber Underlayment To Exceed The STC 50 Rating Required On The Woodfloor

Full Spread Glue For Our Rift And Quartered White Oak Flooring At Our Navyyardreno We First Glue Down A 1 4” Rubber Underlayment To Exceed The STC 50 Rating Required On The Woodfloor

Full spread glue for our rift and quartered white oak flooring at our navyyardreno We first glue down a 1 4u201d rubber underlayment to exceed the STC 50 rating required on the concrete deck (high rise condo no moisture issues). We also install this under the tile for crack isolation and sound dampening. themoderncraftsman nsbuilders designbuildrepeat design designer interior interiors interiordesign build builder architecture remodel renovation luxuryhomes boston ihaveathingforfloors wood woodwork woodworking woodfloor woodfloors charlestown vans whiteoak oak riftandquartered

  • Oak Horizon Live Pure 14(t) X 138(w) X 2200(l) Boenflooring Boenfloor Woodflooring Woodfloor Gisungmaru Interior Interiordesign Boen

  • Photo Credit : Canadiancarpenter For A Shoutout Use Carpentry Shoutout On Your Pic Double Tap And Tag Your Fellow Woodworkingcarpentry Loving Pals In The Comments Dont Woodfloor

  • Highlight Give A Strong Red Mood In Your E This Fall With Kroya Mahogany Stained Dark Red Find Out More About Its Beauty Here : Http: Kroyafloors Com Collections Single Plank Woodfloor
  • Woodfloor Post Concert With Citizenway Dinnerandashow Liveconcert Intimateshow Wbfj Citizenway Band Withtheband Meetandgreet Hangingwiththeband Lookingdown Boots Christianband

  • Sanded Off The Old Adhesive Residue That Was Hiding These Beautiful Red Oak Floors Woodfloor Woodflooring Hardwood Hardwoodfloors Woodfloorrefinishng Woodsanding Woodworking

Discussions

25 Comments

  1. sailor_squirrley says:

    Don’t walk in it!

  2. jakebrutonlive says:

    When it comes to sound dampening below tile @schlutersystemsna is now offering their crack prevention mat with an insulated backing. It also accepts their heating wire.

  3. mackofalltradessc says:

    Are those like leather chucks or some hipster look alike version 😂

  4. nsbuilders says:

    @mackofalltradessc vans 😎

  5. buildingguru says:

    What rubber matt are you using? Cork board is used a lot as well.

  6. artinger_and_son_gc says:

    So the oak is only glued down to the rubber? No fasteners at all? @nsbuilders

  7. ethan_efil says:

    Vans are my favourite work shoes as well 🙌🏼😎

  8. carpentry_daily says:

    @tinyanchorstudios again 😂😂😂

  9. d.i.wy_att says:

    You’ll use that instead of thin set? That’s interesting I like the idea.

  10. tinyanchorstudios says:

    @carpentry_daily it’s a thing. What can i say?

  11. nsbuilders says:

    @buildingguru usually regipol but this is another brand

  12. nsbuilders says:

    @artinger_and_son_gc nope. Concrete/glue/rubber/glue/wood

  13. nsbuilders says:

    @ethan_efil meeting days 😬

  14. nsbuilders says:

    @d.i.wy_att thinset? No tile will still be installed with thinset. This is wood flooring.

  15. markandlola says:

    What brand of glue do you use to install the rubber?

  16. markandlola says:

    What brand of glue do you use to install the rubber?

  17. premierwoodcrafting98 says:

    @markandlola we typically use a urethane adhesive.

  18. caleb_durdaller says:

    I've always wondered with no nails, how do they get a warped or bent piece to fit? Is it an engineered floor with white oak 5/16" veneer? I'd guess that the engineered stuff would be all nice and straight? But even the highest grade #1 quartersawn 3/4" oak will have warped pieces in my experience. Just wondering

  19. villanuevaandsonsflooring says:

    Do you you typically roll your rubber and or your oak during install?

  20. lucaslhenry says:

    @markandlola @nsbuilders I’m curious as well which brand you are using?

  21. nsbuilders says:

    @caleb_durdaller engineered for sure.

  22. nsbuilders says:

    @villanuevaandsonsflooring I don’t believe so.

  23. caleb_durdaller says:

    @nsbuilders thanks for info. Question solved!

  24. alessandro_gerull says:

    Really great post, follow me? :)

  25. decorboston says:

    Pattern inspo is everywhere even behind the scenes! Love the circular pattern of the rubber @nycaakash

Leave a Reply

Your email address will not be published. Required fields are marked *