[Woodfloor] Woodfloor Sanding Down Epoxy In Dual Action Mode With The RO150 From Festool Usa

Woodfloor Sanding Down Epoxy In Dual Action Mode With The RO150 From Festool Usa

Sanding down epoxy in dual action mode with the RO150 from festool usa

  • Oak Horizon Live Pure 14(t) X 138(w) X 2200(l) Boenflooring Boenfloor Woodflooring Woodfloor Gisungmaru Interior Interiordesign Boen

  • Photo Credit : Canadiancarpenter For A Shoutout Use Carpentry Shoutout On Your Pic Double Tap And Tag Your Fellow Woodworkingcarpentry Loving Pals In The Comments Dont Woodfloor

  • Highlight Give A Strong Red Mood In Your E This Fall With Kroya Mahogany Stained Dark Red Find Out More About Its Beauty Here : Http: Kroyafloors Com Collections Single Plank Woodfloor
  • Woodfloor Post Concert With Citizenway Dinnerandashow Liveconcert Intimateshow Wbfj Citizenway Band Withtheband Meetandgreet Hangingwiththeband Lookingdown Boots Christianband

  • Sanded Off The Old Adhesive Residue That Was Hiding These Beautiful Red Oak Floors Woodfloor Woodflooring Hardwood Hardwoodfloors Woodfloorrefinishng Woodsanding Woodworking

Discussions

28 Comments

  1. canadianwoodworks says:

    #wood #wooden #sanding #design #festool #festoolrotex #craftsman #craftmanship #designboom #designdecor #diy #diyproject #diycraft #architecturelover #instagrammer #instavideo #theweekoninstagram #weekly_feature #makersmark #makerlife #designlife #woodfloor #craft #crafty #makerlife #video #instagramers #epoxy #WoodGrain #woodshop

  2. freedomvans says:

    Does the sander reverse direction?

  3. ty_bye says:

    How do you avoid the little fish eyes/rings when using the orbital?

  4. antoni.spizzirri says:

    what was that you were rubbing on the bottom?

  5. dewars.hardwood says:

    @canadianwoodworks what was that cool trick rubbing on the sanding pad? Remove buildup ?

  6. ebhofer says:

    @ty_bye following...

  7. woodntitbeneat says:

    Crepe rubber. It cleans the paper and extends the useful life.

  8. liveedgeofleicester says:

    What grit do you take it to?? To loose the fish eye effect? Thanks in advance.👍🏽

  9. josh_kinkead says:

    @canadianwoodworks same question as above ☝️. What grit are you taking it to, taking into consideration you guys use Rubio and I would assume don't sand much past 150?

  10. r_jones83 says:

    @daviescarpentry

  11. irvilicious says:

    @jcorbett3 Spotted! ;)

  12. satoriandscout says:

    Nice product design and detailing // SATORI & SCOUT

  13. fedorwoods says:

    You really can’t beat the ro150! I love how it’s perfectly balanced and floats on the surface even in rotex mode. ✌🏻

  14. sumptasrealm says:

    Worked in the medical field and now manufacturing, I would love to do an a apprenticeship in wood working after watching you guys. I'm sure great wood makes the difference.

  15. natashapetsinis says:

    @tan_tantoon

  16. lesleeturner says:

    Beautiful

  17. vantreeseconstruction says:

    @woodntitbeneat love that stuff!

  18. vantreeseconstruction says:

    @liveedgeofleicester it's also how much pressure is applied as well as grit and type of paper of course

  19. crapthecrap says:

    @joakimkb

  20. brackett_co says:

    @fedorwoods Oh it can definitely be beaten. Mirka Deros blows it away and Metabo's dual action sander is as good for MUCH less $.

  21. matt12trees says:

    @brackett_co just got the Mirka and it makes the Festool feel awful in comparison!

  22. brackett_co says:

    @matt12trees Festool sanders are way over hyped like most of their stuff. It isnt total garbage but it isn't as good as the hype nor remotely worth their hysterical prices. Mirka isnt cheap but it actually is that good.

  23. fedorwoods says:

    @brackett_co I looked into the mirka sanders but like you mentioned they aren’t cheap either and I didn’t see a rotex and orbit mode on them. After getting the 6” line I feel like festool’s 5” sanders are a joke. That said I’ve been pleased and saved hours in a day with the ro150. Haven’t had hands on the metabo lineup, but have heard good things.

  24. fedorwoods says:

    @matt12trees if i recall the mirkas have a 3 or 5mm stroke with one mode only right? I looked at them but the price point was as high as the rotex and I didn’t seem to have rotex mode.

  25. ericwood121 says:

    @ty_bye I found if you sand 1/2 to 1 inch in Distance per second the fish eye Disapear I found the it is from sanding to fast in distance

  26. ericwood121 says:

    @liveedgeofleicester I found if you sand 1/2 to 1 inch in Distance per second the fish eye Disapear I found the it is from sanding to fast in distance

  27. allandnery says:

    Nice piece!

  28. holzwerke says:

    Good

Leave a Reply

Your email address will not be published. Required fields are marked *